Opto-Input Adapter /i
Opto-Input Adapter /i is a photosensitive cell for reading any status indicator on a controlled device. It is fastened on…
relayCUE-8 is an eight-channel relay switching unit for loads up to 10 A per channel, suitable for controlling lights, drapes, projection screens and AC/DC motors. It is controlled over an RS-485 serial channel or by eight contact inputs for wall switches, and mounts on a DIN rail.
🛡️ 3 years warranty
Opto-Input Adapter /i is a photosensitive cell for reading any status indicator on a controlled device. It is fastened on…
NFC Reader is an expansion module that adds NFC (13.56 MHz, ISO 14443A) to touchONE and touchCUE 7” and 10.1”…
Mounting Adapter 7 lets the touchCUE-7-W and touchONE-7-W panels be used as a tabletop unit or mounted on a wall…
Mounting Adapter 10 lets the touchCUE-10-W and touchONE-10-W panels be used as a tabletop unit or mounted on a wall…
IR Adapter Set is a set of five infrared emitters for controlling AV devices with IR control. Each emitter has…
DALIpwr is a DIN rail power supply for the DALI bus with a maximum output load of 240 mA, needed…
CUEadapter-24P24 is a wall-mount AC/DC switching power supply with exchangeable AC plugs, providing 24 VDC / 24 W from a…
CUEadapter-24DIN15 is a DIN rail switching power supply delivering 24 VDC / 15 W from a universal 90–264 VAC input.…
keypadCUE-55 is a fully customizable 8-button control panel compatible with all CUE controllers, with programmable per-button LED indication and swappable…
liteCUE-basic is a cost-effective control system pairing the controlCUE-basic controller with an 8-button keypadCUE-55 keypad. The whole system runs on…
PEA208 is a two-channel 0–10 V analog output interface for controlling dimmers, fluorescent lamp ballasts, valves and similar devices, with…
PET102 is a one-channel dimmer for resistive and capacitive loads up to 2 A, suitable for dimming electronic transformers. It…
| SKU | CS0335-2 |
|---|---|
| Control ports | • 8x Digital contact closure input, 2x 8-pin connector |
| Power ports | • 4x High-voltage relay C-NO • 4x High-voltage relay NC-C-NO |
| Insulation strength | • 2.5 kV between power and control circuits |
| LED indicators | • 3 x LED indicators for power supply, serial channel activity • 8x status of all relays |
| Buttons | • 8x Test button for power relay control • 1x ACT button for address and bank settings |
| Serial communication | • RS-485, 5-pin connector |
| Power supply | • 110 or 230 VAC, 50 / 60 Hz, 6 W • Terminals 1.5 mm2 |
| Physical | • Plastic DIN rail compatible enclosure • Dimensions 159 x 90 x 58 mm / 6.2” x 3.5” x 2.3” • 9 DIN modules 17.5 mm • Weight 0.5 kg / 1.1 lb |
| Operating environment | • Temperature 0° to 60° C • Humidity 10% to 90% non-condensing |
Compatibility information has not been specified.