Wireless Module W
Wireless Module W is an expansion module for the touchONE-10-W reservation panel that adds Wi-Fi (IEEE 802.11a/b/g/n/ac) as a replacement…
relayCUE-8 is an eight-channel relay switching unit for loads up to 10 A per channel, suitable for controlling lights, drapes, projection screens and AC/DC motors. It is controlled over an RS-485 serial channel or by eight contact inputs for wall switches, and mounts on a DIN rail.
🛡️ 3 years warranty
Wireless Module W is an expansion module for the touchONE-10-W reservation panel that adds Wi-Fi (IEEE 802.11a/b/g/n/ac) as a replacement…
Wireless Module M is an expansion module for touchONE and touchCUE 7” and 10.1” multisurface panels that adds Wi-Fi (IEEE…
Wall Set 55 is a set for installing a CUE keypad on a wall, consisting of a metal wall adapter…
Under Desk Holder 55 is a grey metal holder for installing a CUE keypad under a table. It attaches to…
Tabletop Stand 5 is a table stand for the touchCUE-5-knob and touchONE-5 panels, holding the panel at an ergonomic 15°…
Tabletop Holder 55 is a grey metal holder for installing a CUE keypad on top of a table. It attaches…
RS-485 serial cable, 1 m, with a 5-pin 3.5 mm Phoenix connector and an RJ-14 connector, for connecting a controller…
RS-485 serial cable, 0.2 m, with a 3-pin 3.5 mm Phoenix connector and an RJ-14 connector, for connecting a controller…
Rack Mounting Shelf is a 1U stainless steel shelf for installing CUE controllers and IP interfaces in a 19” EIA…
Designed for the spaces people use. A versatile wall-mounted touch panel for room scheduling, workplace services and other Android-based applications.…
PoE Adapter is a single-port Power over Ethernet injector compliant with IEEE 802.3af, delivering up to 15.4 W together with…
Pan Adapter 55 is a metal adapter for installing a CUE keypad into PANCONNECT boxes that are not prepared for…
| SKU | CS0335-2 |
|---|---|
| Control ports | • 8x Digital contact closure input, 2x 8-pin connector |
| Power ports | • 4x High-voltage relay C-NO • 4x High-voltage relay NC-C-NO |
| Insulation strength | • 2.5 kV between power and control circuits |
| LED indicators | • 3 x LED indicators for power supply, serial channel activity • 8x status of all relays |
| Buttons | • 8x Test button for power relay control • 1x ACT button for address and bank settings |
| Serial communication | • RS-485, 5-pin connector |
| Power supply | • 110 or 230 VAC, 50 / 60 Hz, 6 W • Terminals 1.5 mm2 |
| Physical | • Plastic DIN rail compatible enclosure • Dimensions 159 x 90 x 58 mm / 6.2” x 3.5” x 2.3” • 9 DIN modules 17.5 mm • Weight 0.5 kg / 1.1 lb |
| Operating environment | • Temperature 0° to 60° C • Humidity 10% to 90% non-condensing |
Compatibility information has not been specified.