Opto-Input Adapter /i
Opto-Input Adapter /i is a photosensitive cell for reading any status indicator on a controlled device. It is fastened on…
PET105 is a one-channel dimmer for resistive and capacitive loads up to 5 A, suitable for dimming electronic transformers. It is controlled over PEbus or by potential-free contact inputs and mounts on a DIN rail.
🛡️ 3 years warranty
Opto-Input Adapter /i is a photosensitive cell for reading any status indicator on a controlled device. It is fastened on…
NFC Reader is an expansion module that adds NFC (13.56 MHz, ISO 14443A) to touchONE and touchCUE 7” and 10.1”…
Mounting Adapter 7 lets the touchCUE-7-W and touchONE-7-W panels be used as a tabletop unit or mounted on a wall…
Mounting Adapter 10 lets the touchCUE-10-W and touchONE-10-W panels be used as a tabletop unit or mounted on a wall…
IR Adapter Set is a set of five infrared emitters for controlling AV devices with IR control. Each emitter has…
DALIpwr is a DIN rail power supply for the DALI bus with a maximum output load of 240 mA, needed…
CUEadapter-24P24 is a wall-mount AC/DC switching power supply with exchangeable AC plugs, providing 24 VDC / 24 W from a…
CUEadapter-24DIN15 is a DIN rail switching power supply delivering 24 VDC / 15 W from a universal 90–264 VAC input.…
keypadCUE-55 is a fully customizable 8-button control panel compatible with all CUE controllers, with programmable per-button LED indication and swappable…
liteCUE-basic is a cost-effective control system pairing the controlCUE-basic controller with an 8-button keypadCUE-55 keypad. The whole system runs on…
PEA208 is a two-channel 0–10 V analog output interface for controlling dimmers, fluorescent lamp ballasts, valves and similar devices, with…
PET102 is a one-channel dimmer for resistive and capacitive loads up to 2 A, suitable for dimming electronic transformers. It…
| SKU | CS0245-1 |
|---|---|
| Control ports | • 2x Potential free contact input, terminals 1.5 mm2 • 1x Regulated output, 230 / 110 VAC, terminals 1.5 mm2 • Max. load 5 A • Load type resistive and capacitive • Trailing - edge phase control • Over-current protection by electronic fuse |
| System communication | • 2x PEbus, RJ-11 connector |
| Power supply | • 110 or 230 VAC, 50 / 60 Hz, 5 A |
| LED indicators | • Power / PEbus activity • Output level • Max. temperature overload and over-current fuse |
| Physical | • Plastic DIN rail compatible enclosure • Dimensions 106 x 90 x 58 mm / 4.2” x 3.5” x 2.3” • 6 DIN modules 17.5 mm • Weight 0.8 kg / 1.8 lb |
| Operating environment | • Temperature 0° to 40° C • Humidity 10% to 90% non-condensing |
Compatibility information has not been specified.