Wireless Module W
Wireless Module W is an expansion module for the touchONE-10-W reservation panel that adds Wi-Fi (IEEE 802.11a/b/g/n/ac) as a replacement…
PEA208 is a two-channel 0–10 V analog output interface for controlling dimmers, fluorescent lamp ballasts, valves and similar devices, with two switching relay outputs for ballast power. It is controlled over PEbus or by potential-free contact inputs and mounts on a DIN rail.
🛡️ 3 years warranty
Wireless Module W is an expansion module for the touchONE-10-W reservation panel that adds Wi-Fi (IEEE 802.11a/b/g/n/ac) as a replacement…
Wireless Module M is an expansion module for touchONE and touchCUE 7” and 10.1” multisurface panels that adds Wi-Fi (IEEE…
Wall Set 55 is a set for installing a CUE keypad on a wall, consisting of a metal wall adapter…
Under Desk Holder 55 is a grey metal holder for installing a CUE keypad under a table. It attaches to…
Tabletop Stand 5 is a table stand for the touchCUE-5-knob and touchONE-5 panels, holding the panel at an ergonomic 15°…
Tabletop Holder 55 is a grey metal holder for installing a CUE keypad on top of a table. It attaches…
RS-485 serial cable, 1 m, with a 5-pin 3.5 mm Phoenix connector and an RJ-14 connector, for connecting a controller…
RS-485 serial cable, 0.2 m, with a 3-pin 3.5 mm Phoenix connector and an RJ-14 connector, for connecting a controller…
Rack Mounting Shelf is a 1U stainless steel shelf for installing CUE controllers and IP interfaces in a 19” EIA…
Designed for the spaces people use. A versatile wall-mounted touch panel for room scheduling, workplace services and other Android-based applications.…
PoE Adapter is a single-port Power over Ethernet injector compliant with IEEE 802.3af, delivering up to 15.4 W together with…
Pan Adapter 55 is a metal adapter for installing a CUE keypad into PANCONNECT boxes that are not prepared for…
| SKU | CS0225-2 |
|---|---|
| Control ports | • 1x Serial RS-485 • 4x Potential free contact input, terminals 1.5 mm2 • 2x Analog output 0 – 10 V, terminals 1.5 mm2 • 10 bits resolution • Max. 100 mA sink • Max. 15 mA source • 2x Relay 230 V, max. 8 A, terminals 1.5 mm2 |
| System communication | • 2x PEbus, RJ-11 connector |
| Power supply | • 110 or 230 VAC, 50 / 60 Hz, 12 W |
| LED indicators | • Power / PEbus activity • Level of both outputs |
| Physical | • Plastic DIN rail compatible enclosure • Dimensions 71 x 90 x 58 mm / 2.8” x 3.5” x 2.3” • 4 DIN modules 17.5 mm • Weight 0.3 kg / 0.7 lb |
| Operating environment | • Temperature 0° to 60° C • Humidity 10% to 90% non-condensing |
Compatibility information has not been specified.