Wireless Module W
Wireless Module W is an expansion module for the touchONE-10-W reservation panel that adds Wi-Fi (IEEE 802.11a/b/g/n/ac) as a replacement…
CUEadapter-24DIN15 is a DIN rail switching power supply delivering 24 VDC / 15 W from a universal 90–264 VAC input. It is two DIN modules wide, with overload and short-circuit protection and tool-free snap-on mounting.
🛡️ 3 years warranty
Wireless Module W is an expansion module for the touchONE-10-W reservation panel that adds Wi-Fi (IEEE 802.11a/b/g/n/ac) as a replacement…
Wireless Module M is an expansion module for touchONE and touchCUE 7” and 10.1” multisurface panels that adds Wi-Fi (IEEE…
Wall Set 55 is a set for installing a CUE keypad on a wall, consisting of a metal wall adapter…
Under Desk Holder 55 is a grey metal holder for installing a CUE keypad under a table. It attaches to…
Tabletop Stand 5 is a table stand for the touchCUE-5-knob and touchONE-5 panels, holding the panel at an ergonomic 15°…
Tabletop Holder 55 is a grey metal holder for installing a CUE keypad on top of a table. It attaches…
RS-485 serial cable, 1 m, with a 5-pin 3.5 mm Phoenix connector and an RJ-14 connector, for connecting a controller…
RS-485 serial cable, 0.2 m, with a 3-pin 3.5 mm Phoenix connector and an RJ-14 connector, for connecting a controller…
Rack Mounting Shelf is a 1U stainless steel shelf for installing CUE controllers and IP interfaces in a 19” EIA…
PoE Adapter is a single-port Power over Ethernet injector compliant with IEEE 802.3af, delivering up to 15.4 W together with…
Pan Adapter 55 is a metal adapter for installing a CUE keypad into PANCONNECT boxes that are not prepared for…
Opto-Input Adapter /i is a photosensitive cell for reading any status indicator on a controlled device. It is fastened on…
| SKU | CS0474 |
|---|---|
| Input | • Universal range type • Input voltage 85 to 264 VAC / 120 to 370 VDC • AC inrush current max. 64 A at 230 VAC (cold start) • No load power consumption <0.5 W • Terminals |
| Output | • Voltage 24 VDC • Voltage trim range +/- 10% rated output voltage • Power 15 W • Terminals |
| Front panel | • LED indicator power on |
| Protections | • Overload 105% - 160%, constant current limiting, auto-recovery • Over voltage 115% - 135%, shut off |
| Safety standards | • Isolation class II • UL60950-1, TUV60950-1 |
| EMC standards | • EN55022 class B, EN61000-3-2, 3 • EN61000-6-2, EN61000-4-2, 3,4,5,6,8,11 • ENV50204, EN61204-3 |
| Physical | • Plastic enclosure • 2 DIN rail modules • Protection degree IP20 • Dimensions 25 x 93 x 56 mm / 1.0” x 3.7” x 2.2” • Weight 0.1 kg / 0.2 lb |
| Operating environment | • Cooling by free air convection • Temperature -20° to 60° C • Humidity 10% to 90% non-condensing |
Package contents have not been specified.
Compatibility information has not been specified.