Wireless Module W
Wireless Module W is an expansion module for the touchONE-10-W reservation panel that adds Wi-Fi (IEEE 802.11a/b/g/n/ac) as a replacement…
NFC Reader is an expansion module that adds NFC (13.56 MHz, ISO 14443A) to touchONE and touchCUE 7” and 10.1” panels for reservation and control applications. It has an integrated antenna and a slim plastic enclosure.
🛡️ 3 years warranty
Wireless Module W is an expansion module for the touchONE-10-W reservation panel that adds Wi-Fi (IEEE 802.11a/b/g/n/ac) as a replacement…
Wireless Module M is an expansion module for touchONE and touchCUE 7” and 10.1” multisurface panels that adds Wi-Fi (IEEE…
Wall Set 55 is a set for installing a CUE keypad on a wall, consisting of a metal wall adapter…
Under Desk Holder 55 is a grey metal holder for installing a CUE keypad under a table. It attaches to…
Tabletop Stand 5 is a table stand for the touchCUE-5-knob and touchONE-5 panels, holding the panel at an ergonomic 15°…
Tabletop Holder 55 is a grey metal holder for installing a CUE keypad on top of a table. It attaches…
RS-485 serial cable, 1 m, with a 5-pin 3.5 mm Phoenix connector and an RJ-14 connector, for connecting a controller…
RS-485 serial cable, 0.2 m, with a 3-pin 3.5 mm Phoenix connector and an RJ-14 connector, for connecting a controller…
Rack Mounting Shelf is a 1U stainless steel shelf for installing CUE controllers and IP interfaces in a 19” EIA…
PoE Adapter is a single-port Power over Ethernet injector compliant with IEEE 802.3af, delivering up to 15.4 W together with…
Pan Adapter 55 is a metal adapter for installing a CUE keypad into PANCONNECT boxes that are not prepared for…
Opto-Input Adapter /i is a photosensitive cell for reading any status indicator on a controlled device. It is fastened on…
| SKU | CS0618 |
|---|---|
| Compatibility | • Frequency 13.56 MHz • Norm ISO 14443A |
| Extension for | • touchCUE-7-M, touchONE-7-M • touchCUE-10-M, touchONE-10-M |
| Physical | • Plastic enclosure • Protection IP20 • Dimensions 84 x 16 x 6 mm / 3.3” x 0.6” x 0.2” when installed • Weight 20 g / 0.04 lb |
| Environment conditions | • Operating temperature 10° to 40° C • Storage temperature 0° to 60° C • Relative humidity 10% to 90% non-condensing |